Quality

QUALITY & ASSURANCE

TESTED AT EVERY STAGE

Adaptability and flexibility, guided by international and local standards. An in-house casting laboratory in the same estate checks metal chemistry, sand properties and mechanical performance on every job.

SAND TESTING

  • Green Compression & Wet Tensile Strength
  • Permeability & Compatibility
  • Afs Sieve Analysis (Grain Fineness)
  • Moisture, Clay & Hardness Testing

METAL & PHYSICAL TESTING

  • Electronic Carbon–silicon Analyzer (Molten Metal)
  • Spectro - Analysis & Micro-structure
  • Brinell Hardness & Tensile Strength
  • Metallurgical Microscope

Chemistry & Hardness — Verified In-house

Every heatis analysed beforepouringand every castingchecked for hardness.Ourin-housemetallurgical laboratory keeps compositionand mechanical properties withingrade— withlive readings visibleonthe shop floor.

OPTICAL EMISSION SPECTROMETER

Full-spectrum chemistry – C, Si, Mn, P, S, Cr, Ni, Mo, Cu, Mg and trace elements measured in seconds to confirm grade.

Type Optical Emission (Spark)
Base Iron/ Cast Iron
Analysis Every Heat Before Pouting
OPTICAL EMISSION SPECTROMETER

BRINELL HARDNESS TESTER

Automatic impression reading to — IS / ASTM — hardness verified on castings and test bars for every batch.

Type Brinell (HBW)
Test Load Up to 3000 kgf
Measurement Optical / Computerised

ONLINE COMPOSITION DISPLAY

LIVE HEAT MONITORING

Live chemistry of every heat – grade, item, heat number and each element – before tapping and inoculation.

Function Live Heat Composition
Display Grade · Item ·Heat No.
Elements C, Si, Mn, Cr, Ni, Mo, Cu, Mg
Linked to Spectrometer

OUR QUALITY PROCESS

Quality at Every Step

We follow a systematic quality control process to ensure that every casting we produce meets the highest standards of performance and rellability,

1
Raw Material
Inspection Careful selection and inspection of raw materials for chemical & physical properties.
2
In-Process Monitoring
Continuous monitoring of melting, molding, and casting processes to ensure consistency.
3
Testing & Inspection
Dimensional checks, lab testing, NDT and other inspections as per after requirements.
4
Final Quality Check
Every component is thoroughly inspected before packing and dispatch.
5
Safe Packing & Delivery
Secure packaging and timely delivery to ensure product integrity.

TESTING & INSPECTION FACILITIES

Advanced Equipment. Accurate Results.

Our in-house testing facilities ensure that every product meets the required quality parameters.

SAND RAMMER

AFS SAND SIEVER

DIGITAL PERMEABILITY

UNIVERSAL STRENGTH

UNIVERSAL STRENGTH

CLAY TESTER

SAND WASHER

CORE HARDNESS

Mould Hardness Tester

Mould Hardness Tester